DMM .75kW servo motors, drives, cables

Results 1 to 3 of 3

Thread: DMM .75kW servo motors, drives, cables

  1. #1
    Member
    Join Date
    Nov 2013
    Posts
    77
    Downloads
    0
    Uploads
    0

    Default DMM .75kW servo motors, drives, cables

    Testing the waters here on selling my unused but tested servo motor kit for my mill conversion... got into a bad accident awhile back and need to try and recover some funds. These are AC 750w nema 34 mount servos with absolute magnetic encoders with ultra high resolution. They have 3/4" shafts with a keyway milled in. Motor, encoder, and tuning cable connect to PC all included. They are currently wired into my panel I previously mentioned still is not complete. However, if you are interested in the Dsub breakout cable to go from the drive to motion controller and around a 2-3' length is acceptable, they can be included as well. Will sell one or both axis.. thx for looking, message me with offer if your interested!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails DMM .75kW servo motors, drives, cables-img_4343-jpg   DMM .75kW servo motors, drives, cables-img_1090-jpg   DMM .75kW servo motors, drives, cables-img_1345-jpg  


  2. #2
    Member
    Join Date
    Nov 2013
    Posts
    4918
    Downloads
    0
    Uploads
    0

    Default Re: DMM .75kW servo motors, drives, cables

    Hi,
    where are you and how much?

    Craig



  3. #3
    Member
    Join Date
    Nov 2013
    Posts
    77
    Downloads
    0
    Uploads
    0

    Default Re: DMM .75kW servo motors, drives, cables

    My apologies its been awhile since I've posted anything for sale, Items are located in southern NJ, USA. zip is 08084 if you want to calculate your own shipping costs. Id recommend going to one of the several places on ebay selling these new to guesstamate the shipping to your location. There is no easy way for me to weigh or estimate an accurate enough package size with most of it currently wired in. Iooking to get $400 per axis since they have never been used, only no load tested.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DMM .75kW servo motors, drives, cables

DMM .75kW servo motors, drives, cables