Mach 3 E stop problem


Results 1 to 2 of 2

Thread: Mach 3 E stop problem

  1. #1
    Registered nevillewilliams's Avatar
    Join Date
    Feb 2008
    Location
    south africa
    Posts
    20
    Downloads
    2
    Uploads
    0

    Default Mach 3 E stop problem

    Hi is there any one who has come across this problem.
    When the E stop is activated the motors are armed and power is sent to the boards (you can actually hear the pitch of the electronic noise on the motors) but the motors can't run because of the e stop if the stop is cleared the power to the motors is lost but the Dro Still operates ?

    Similar Threads:


  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    23173
    Downloads
    0
    Uploads
    0

    Default Re: Mach 3 E stop problem

    Sounds as though the E-Stop wiring has not been done correctly, main power removed from all motors and Mach advised via the E-stop input pin.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mach 3  E stop  problem

Mach 3  E stop  problem

Mach 3  E stop  problem