Flashcut with Plasma - Don't want to pierce, Keep torch down with a nested pattern?


Results 1 to 3 of 3

Thread: Flashcut with Plasma - Don't want to pierce, Keep torch down with a nested pattern?

  1. #1
    Registered
    Join Date
    Mar 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Flashcut with Plasma - Don't want to pierce, Keep torch down with a nested pattern?

    Hi Everyone,

    I was just wondering if there is a way (besides manually manipulating the g-code) to cut a nested pattern of shapes using Flashcut without having individual pierces for each part. It's hard on our torch to be piercing, it's slower, and we are wasting too much material by the time you account for pierce, leadin, etc.

    Any ideas, let me know. Thanks!

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2011
    Location
    USA
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Re: Flashcut with Plasma - Don't want to pierce, Keep torch down with a nested patter

    What version of flashcut?



  3. #3
    Member
    Join Date
    Mar 2004
    Location
    Wisconsin
    Posts
    413
    Downloads
    31
    Uploads
    1

    Default Re: Flashcut with Plasma - Don't want to pierce, Keep torch down with a nested patter

    I am not aware of any "controller" that can ignore the G&M Code just by a flip of a switch..... What YOU are asking for regards most controllers, is something that would be controlled by how things are drawn and subsequent toolpaths created, or perhaps handled as an option in a forward thinking CAM program, where algorithms can put into place to specifically ignore any unnecessary z axis action specifically for plasma work.

    It would be a challenge though as each item would not have a lead in and lead out on EACH side to cut to. If I HAD to do this now and with Flashcut (older version), I would just draw connectors between the items and that would take an awful lot of time on a large table of nested items.

    If I were to ask for such an option, I would not hold back from asking Flashcut developers to peer into this as an option (if they do not already have it in their latest impeccable plasma specific control software). They have been very VERY innovative with their latest versions, and because they have integrated a fantastic CAM program into their control in latest versions, it is something that might be possible as long as you do not care exactly where your lead in/outs end up being.

    Chris L


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Flashcut with Plasma - Don't want to pierce, Keep torch down with a nested pattern?

Flashcut with Plasma - Don't want to pierce, Keep torch down with a nested pattern?