flashcut and chinese spindle/VFD


Results 1 to 6 of 6

Thread: flashcut and chinese spindle/VFD

  1. #1
    Member
    Join Date
    Nov 2011
    Location
    United States
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default flashcut and chinese spindle/VFD

    I have one of those amazon chinese spindle/VFD combos 2.2Kw and was wondering what is needed to control on and off as well as spindle speed within flashcut CNC? I have the 2.5a micro cnc controller

    Similar Threads:


  2. #2
    *Registered User* D1YGuy's Avatar
    Join Date
    Jul 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: flashcut and chinese spindle/VFD

    Quote Originally Posted by msdeltaguy View Post
    I have one of those amazon chinese spindle/VFD combos 2.2Kw and was wondering what is needed to control on and off as well as spindle speed within flashcut CNC? I have the 2.5a micro cnc controller
    I want to know about this as well. I recently purchased a 7.5kW VFD to have three phase power at home and run the spindle. Would be nice to run the spindle through the software.



  3. #3
    Member
    Join Date
    Nov 2011
    Location
    United States
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: flashcut and chinese spindle/VFD

    Quote Originally Posted by D1YGuy View Post
    I want to know about this as well. I recently purchased a 7.5kW VFD to have three phase power at home and run the spindle. Would be nice to run the spindle through the software.
    guess nobody wants to help us out LOL



  4. #4
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: flashcut and chinese spindle/VFD

    Or, nobody using Flashcut has seen this....
    Not sure if there are many Flashcut users here. I don't here it mentioned very often.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Member
    Join Date
    Jan 2011
    Location
    USA
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Re: flashcut and chinese spindle/VFD

    You need the mini io board and version 4.5 I believe.



  6. #6
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: flashcut and chinese spindle/VFD

    Quote Originally Posted by D1YGuy View Post
    I want to know about this as well. I recently purchased a 7.5kW VFD to have three phase power at home and run the spindle. Would be nice to run the spindle through the software.
    This is an old thread but for those that don't know a VFD Drive can only be used for a AC 3 Phase motor

    Is your intension to just run the spindle as your VFD can not give you 3Phase power to run anything else, it can only be used to run a AC 3 Phase motor 7.5Kw is also to big for any normal Home Power service

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

flashcut and chinese spindle/VFD

flashcut and chinese spindle/VFD