Rutex 510A

Results 1 to 10 of 10

Thread: Rutex 510A

  1. #1
    Registered
    Join Date
    Jul 2003
    Location
    southern indiana
    Posts
    126
    Downloads
    0
    Uploads
    0

    Talking Rutex 510A

    Anybody used this yet?

    Looks to be an all in one driver for both axis and torch height controller.

    Any comments, good bad?

    Any other solutions that have worked for people when building and using a plasma cutter?

    Similar Threads:
    Last edited by cncadmin; 07-12-2004 at 05:56 PM.


  2. #2
    Registered
    Join Date
    Sep 2005
    Location
    nîmes
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    bonjour avez vous des info sur les carte rutex r510a



  3. #3
    Registered Aksess's Avatar
    Join Date
    May 2004
    Location
    United States
    Posts
    350
    Downloads
    0
    Uploads
    0

    Default

    I have this contorling board but have never tryed it yet. Yes it has auto torch height control and also will control your plasma after it is wired into the torch. Turning it on and off. and sencing arc voltage well worth the money and the p cut software comes with it.



  4. #4
    Registered Inventthis's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    30
    Downloads
    0
    Uploads
    0

    Exclamation

    I just designed and built my CNC plasma table with the R510B. Table is working but I have some concerns with the driving software (I am using a demo of Steelcut- the guys who developed it are out of business). So far, the table is not able to draw perfect circles. I have attached a pen to the z axis to check the table accuracy. Rutex offer Pcut, which is Dos based and not user friendly. Will post pictures soon.



  5. #5
    Registered
    Join Date
    Sep 2005
    Location
    nîmes
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    bonjour si vous avez des infos j'ai moi meme une carte r510b
    je nai pas fai d'essais .pouvez vous me dire si PCUT fonctionne bien .je crois quil y a une vertion PCUT PRO SI VOUS AVEZ DES INFO SUR LE PRODUIS



  6. #6
    Registered
    Join Date
    Mar 2005
    Location
    usa
    Posts
    361
    Downloads
    0
    Uploads
    0

    Default

    I have also used the 510b and the hardware is good but the software (pcut)
    needs help and is limited to 1000 blocks. They are coming out with new software that is for ( steelcut?) windows but I do not know when.When they get the software as good as the hardware I think it will be a good controller.

    Have fun building
    Mike Laws



  7. #7
    Registered Inventthis's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by danymetal
    bonjour si vous avez des infos j'ai moi meme une carte r510b
    je nai pas fai d'essais .pouvez vous me dire si PCUT fonctionne bien .je crois quil y a une vertion PCUT PRO SI VOUS AVEZ DES INFO SUR LE PRODUIS
    J'utilise steelcut pour tester ma table. La carte R510B est un bon produit mais il faut un meilleur software qui marche sur windows. La carte est facile a connecter et je pourrai t'envoyer mon diagramme de connection.

    Here are some pics of my cnc table using Rutex R510B. For now I have some trouble with tuning the motors. I am not able to draw circles with my setting (see picture). I will need more help if I cannot set it up correctly.

    Attached Thumbnails Attached Thumbnails Rutex 510A-hpim0615-jpg   Rutex 510A-hpim0614-jpg   Rutex 510A-hpim0625-jpg   Rutex 510A-hpim0618-jpg  



  8. #8
    Registered
    Join Date
    Sep 2005
    Location
    nîmes
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    bonjour belle machine sa fais plaisir a voir . la table que lon voi sur les photo fonctinne t'elle avec la r510b ? Moi j'en suis au essais moteur j'utilise des reliance electric electro-craf .si vous avez des photo r510a + moteur que vous utiliser



  9. #9
    Registered
    Join Date
    Sep 2005
    Location
    nîmes
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default

    j' ai fais des essais avec d'autre moteur mai quand je metais sous tention la r510b les moteurs commencer a tourner san lancer le programe si vous avez des info sur moteur et encodeur que vous utiliser



  10. #10
    Registered Inventthis's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default

    I use poly scientific motor C23 series (www.polysci.com )for all axes and 250CPR US digital encoder.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Rutex 510A

Rutex 510A