And it took you how long David with your FLA machine? Very nice.
Our church had a men's Beast Feast tonight where they served rabbit, deer, duck, alligator, white perch, elk, and pig. I didn't go but from the looks of the cars my guess is there were 60-70 men in attendance. So I figured some Walnut trivets would be good door prizes and I made three plus a US flag.
The trivets are finished with mineral oil and the flag is sprayed with Nitrocellulose lacquer. I used gloss but probably should have used semi-gloss. The flag is about 5" x 10" and the trivets range from about 6" to 7" x 10" to 12".
Enjoy!
David
Similar Threads:
David
Romans 3:23
CurlyWoodShop - www.etsy.com/shop/CurlyWoodShop
David Falkner - www.youtube.com/user/difalkner
difalkner - www.instagram.com/difalkner
And it took you how long David with your FLA machine? Very nice.
1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro
Thanks, Bill! Each took 10 minutes or less to cut on the CNC. Fusion 360's Adaptive Clearing can seriously hog some material!
Of course, the table saw, jointer, planer, drum sander, stationary belt sander, spindle sander, ROS, hand sanding, and finishing added a bit more than 10 minutes each.
David
David
Romans 3:23
CurlyWoodShop - www.etsy.com/shop/CurlyWoodShop
David Falkner - www.youtube.com/user/difalkner
difalkner - www.instagram.com/difalkner