Hi All,
I am getting my machine setup. I have a 4x4 Saturn mid '17. I purchased the complete electronics system (NEMA 34) from CNCRouterParts (now AVID CNC). I used the config files from them assuming that the gearing and ballscrews would be the same. the X and Y axis seem approximately right (havent yet cut something to test them out) but when I use the auto z plate, and then rehome it, the x axis moves 20". which is clearly not right. I don't really know where to start to get that back on track. I did an approximate search on this thread but I don't know what to search for. Does anyone have a suggestion for where I could start to tune it?
Plug and Play NEMA 34 CNC Control System - CRP800-00E-8 | Avid CNC | CNC Router Parts
960 oz-in NEMA 34 Motor | Avid CNC | CNC Router Parts
here is a screenshot of the Z axis mach 3 motor config...