MOI3d and Aspire are very different.
Moi is a 3D modeler. Aspire is a Relief modeler.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Not to change the subject to much, but there was discussion at one time on here for using epoxy to fix the FLA ills. Here is one persons experience > https://www.cnczone.com/forums/cnc-w...ml#post2273256
Given the size of the beast he's building, it comes as no surprise he is having difficulty. Epoxy leveling is a tricky business at best and one a machine the size of his, it's beyond tricky. I suggested he contact the folks at West Systems for suggestions.