switch off MECOF via FIDIA

Results 1 to 2 of 2

Thread: switch off MECOF via FIDIA

  1. #1
    Registered mecof73's Avatar
    Join Date
    Jan 2011
    Location
    Bad Reichenhall
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hello guys
    I wanted to completely turn the machine off using the procedure ( Mecof)
    Unfortunately it doesn’t work with the NIGHT OF function.
    Also the command RESET ALL cannot be used in the procedure.

    Have you got any idea??



  2. #2
    Registered DMC_'s Avatar
    Join Date
    Nov 2007
    Location
    Mettingen
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Simply write
    Night on
    >M02
    At the end of the procedure.
    Done!
    Through M02, the Night on gets activated and the controller gets turned off.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

switch off MECOF via FIDIA

switch off MECOF via FIDIA

switch off MECOF via FIDIA