wireless hand wheel for FIDIA controller

Results 1 to 4 of 4

Thread: wireless hand wheel for FIDIA controller

  1. #1
    Registered Fisch's Avatar
    Join Date
    Nov 2007
    Location
    Mengen
    Posts
    7
    Downloads
    0
    Uploads
    0

    Post

    Hello everybodysmile.gif
    I just discovered that the firm Hubitron (http://www.hubitron.de/english/index.htm) is going to release a new wireless hand wheel for FIDIA controller. Hibitron is already on the market for wireless hand wheel for Heidenhain, Siemens and so on...

    When asking about it, they told me that the wheel was running already successfully for one of their customers and that it will be available in January.

    I call that great news because the cable on my FIDIA hand wheel is often too short.

    As we already have a HBG 410-RF for Heidenhain, we can now switch to wireless Fidia controller super.gif



  2. #2
    siebenw's Avatar
    Join Date
    Sep 2008
    Location
    Dietfurt
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default

    Hello

    What about the susceptibility to damage with linear motor?
    Is HPX 21 also supported?
    The cable length for the HPX 21 can be increased up to 10 meters.
    But with X 7200mm machines it can still be too short in some occasions.

    Der Wurstler


  3. #3
    Registered Fisch's Avatar
    Join Date
    Nov 2007
    Location
    Mengen
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Hello

    What about the susceptibility to damage with linear motor?
    Is HPX 21 also supported?
    The cable length for the HPX 21 can be increased up to 10 meters.
    But with X 7200mm machines it can still be too short in some occasions.
    The susceptibility to damage with linear motor should not be a problem, there are used with Siemens and Heidenhain and it works for them...
    HPX21: as far as I know, the HPX21 is being replaced; however it can be activated again when needed through plugging the connector in a different plug on the controller.



  4. #4
    EvilErny's Avatar
    Join Date
    Oct 2010
    Location
    Chemnitz
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    Hello everybody!
    I had a look at the wireless hand wheel on the EMO and it works with Bluetooth- hence it won’t be very interference-prone.

    It’s really a great thing for big machines!! It also lies very well in your hand.
    Regards
    EvilErny



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

wireless hand wheel for FIDIA  controller

wireless hand wheel for FIDIA  controller