Miyano BNC34 Parameters

[Mark18969]

I am looking for a set of parameters for a Miyano BNC34 with a 10TE control.
can anyone send me copy, a list or a download file?

We have a lathe that list the parametetrs, and now won`t single point a thread.


I do not know if this was the cause of the problem.
When we thread at a low RPM, the machine will follow the thread. Once we get to a higher RPM, after cutting 2-3 threads, it will seem to skip, and double cut the thread. We tried swapping the 2 servo drive boards with no change. We went out and replaced the spindle encoder, and that did not fix anything. That was an expensive swap. All that is left is the main board, and a possible parameter that we missed.

It's hard to get help from Miyano on this, and we are still chasing it.
Anyone out there have ideas?
Or if you have mid 1980 BNC34 and the parameters printed out, I would appreciate a copy so we can compare what we have to what you have.

Similar Threads:

• Lost parameters on Miyano bnc-34t
• Need Help!- Miyano MSV-21 Parameters
• miyano bnc34 lathe
• Need Help!- Miyano JNC-35 Lathe Parameters
• NEEDING PARAMETERS MIYANO TSV-21

[TR MFG]

Have you called Miyano in chicago, they can send you the parameter list from your serial number. We have 4 Miyanos(3 BND34S's & 1 JNC 45) here and Ive needed prams before and just called and asked for em.....they didn't charge me

I think Derick, is the name of the guy your'll talk to.....630-766-4141 just ask for service..


Matt

[Mark18969]

Have you called Miyano in chicago, they can send you the parameter list from your serial number. We have 4 Miyanos(3 BND34S's & 1 JNC 45) here and Ive needed prams before and just called and asked for em.....they didn't charge me

I think Derick, is the name of the guy your'll talk to.....630-766-4141 just ask for service..


Matt

I called the phone number and talked to Derrick. He said they only have itne paramets for machines 2000 and newer.

I need to find someone with a machine like mine.

[cnccij12]

Hi Mark18969, did you finally find the parameters, I am in the sae problem my Miyano just lost parameters last friday, unfortunatly we had no back up, can you give an advise where to get them?

[puneetgupta]

Dear Sir,

We shall be highly obliged to you, if you please arrange to get emailed programming parameters of MIYANO BNC 34T as we lost the same. Our -mail id is cyborgind@rediffmail.com

REGARDS
PUNEET GUPTA

I called the phone number and talked to Derrick. He said they only have itne paramets for machines 2000 and newer.

I need to find someone with a machine like mine.

[futheyr]

let me know if you still need the parameters. we have 3 bnc 34t's with fanuc ot controls

[tund@ontops.vn]

Dear Sir,

I have lost parameter of lathe machine Myano 34S due to Batery broken, can you send me parameter of them. my email tund@ontops.vn

thank in advance.
Tu

[Stinger.220]

Please let me know if you can offer the parameters for this machine.
I have a friend that I am trying to help out.
They have a BNC-34 with the Fanuc 3T control.
I got it back up to a basic start screen, and now it is getting alarm 11 and 21 -
I don;t have any values in the N0034 and N0035 - The data sheets I have are hand written with "17a2"
the original numbers are 896 - but are scratched out.

If you can offer any help it would be great.

[Hwangbogeun]

let me know if you still need the parameters. we have 3 bnc 34t's with fanuc ot controls

Dear friend

I have lost parameter of lathe machine Myano BNC 34S
Can you send me parameter , if you have.
email : hw946246@chol.com

Thanks

[mrafitraders]

Dear Sir, I trust you are well. I recently import Miyano BND34S2 with C axis and sub-spindle Fanuc OT from UK. There is no Macro programs in the machine and no manual received with the machine. Can you please help me in this regard? I need to have machine M code list plus Macro programs for C axis and live tools. Thanks in advance. Stay blessed.

[Suchart555]

Dear friend
I would like to NC parameter and PC parameter for
Miyano BNC-34C with Fanuc 0T-A
Master PCB model is A16B-1010-0210

thanks.

a2e.controlservice@gmail.com

[raokmk2003]

Sir,
Pls mail me the BNC 34 T parameters to SLNENTP@rediffmail.com.
My mcn is dead .
pls help

[truongluong]

let me know if you still need the parameters. we have 3 bnc 34t's with fanuc ot controls

Dear Sir

I lost para of Miyano 34T Fanuc O-T lathe after the battery is broken. Pls give parameters of this for recovery. Email: truong0580@gmail.com

Thanks in advance

[diegojulio]

Dear Sir
I hope you can help us with a copy of Parameter and Diagnostic of Miyano BNC-34T with Fanuc OT control and B Axis, 2 turrets.
my email is diegojulio@yahoo.com
Thanks in advance

Diego C