Mori MSG 501 (FS 18i-MA) BOOT UP PROBLEM

[L. Sakthivel]

Dear Friends,
Our Machine Details is as follows:


Machine : Moriseiki model SH403
Machine Serial No : 1176
Control : MSG 501
System : FS 18i – MA(Fanuc)
Sl.No : E00809480s


Our machine is under break down due to corruption of Moriseiki PC Operating System.

The machine has stopped due to power failure. when we again restarted we found that the machine didn’t start.

When we switch on the System in the Panel Board the main Screen of the machine displays as follows :

94 Trident Microsystems Inc. TFT 18 bits V3.0L14 ED060ns
Phoenix BIOS 4.0 Release 5.1
Copyright 1985 – 1996 Phoenix Technologies Ltd., All rights reserved.
Build Time : 09/29/99 12:07:59
BIOS Revision MT :1.00
CPU = Pentium with MMX 233 MHZ
0000640K System RAM Passed
0031744K Extended RAM Passed
System BIOS shadowed
Video BIOS shadowed
UMB upper limit segment address : F1D6
Fixed Dist 0: identified
0S/2 !! SYS02025
0S/2 !! SYS02027
- (Cuusor Blinking)

Kindly help us to overcome from this problem

Similar Threads:

• Need Help!- Mori Seiki Boot Mode
• Mori nv5000 will not boot
• EZ-Trak boot up problem
• Hurco BMC 50 boot problem
• Need Help!- boot problem

[jholapara]

Dear sir we are facing same problem in my mori seiki machine so can you help us how to solve it this problem?