G81/G83 can cycles on 0T

[Welder2022]

Is it possible to use G81/G83 can cycles on 0T? We cannot seem to figure this out. Machine is a Hardinge Conquest lathe. Parameter change?

Similar Threads:

• Need Help!- Techno CNC w/Weihong NK105G2 controller problems (array process & G81 canned cycles)
• Help with G81
• Need Help!- Mach3Turn Canned Cycles G81-G89
• Newbie- need help with drill cycles, G81 etc.
• Why is G81 doing this?

[lshingleton]

On a lathe on Z axis drilling try G74

[forhire]

I run an 0TA control on a SZIM lathe. As lshingleton mentioned, you'll want to use G74.

You may find this handy:
https://www.helmancnc.com/simple-cnc...rilling-cycle/

[guhl]

Parameter 909#3 usually opens this option

[zavateandu]

Parameter 909#3 usually opens this option

Please do not show option paramater in public
you have to do it in private
Please read the rules
Will not be a next time
cheers

[CNCRim]

How old is the machine? older machine probably not have it at all.

[RaderSidetrack]

Please do not show option paramater in public
you have to do it in private
Please read the rules
Will not be a next time
cheers

I'm posting this message as a CNCZone Moderator.

I, and several other Moderators, are not aware of a rule that says "option parameters" can not be posted in CNCZone threads. We would welcome a link to such a rule, or further explanation.

[Superman]

I'm posting this message as a CNCZone Moderator.

I, and several other Moderators, are not aware of a rule that says "option parameters" can not be posted in CNCZone threads. We would welcome a link to such a rule, or further explanation.

Oh-oh
You cannot fathom the can-of-worms you have just opened
Hope your pockets have lots of cash to pay the suits from FANUC for allowing propriety info to be displayed on a public forum
You may as well say its OK to allow ppl to put up pirate software links for CAD or CAM wannabes

[Superman]

I'm posting this message as a CNCZone Moderator.

I, and several other Moderators, are not aware of a rule that says "option parameters" can not be posted in CNCZone threads. We would welcome a link to such a rule, or further explanation.

Found the rule....
Posted by CNCAdmin as a "Sticky" @ the top of Fanuc forum
https://www.cnczone.com/forums/fanuc/53037-cnc-software-4.html

I suggest the "Moderators" take a refresher at their rules & regs.