MPX 200i tap cycle


Results 1 to 2 of 2

Thread: MPX 200i tap cycle

  1. #1
    Member
    Join Date
    Sep 2007
    Location
    u.s.a
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default MPX 200i tap cycle

    Hello all,
    I am looking for any info on the code specific to the MXP 200i fanuc tap cycle. Dropping the inquiry here while I search online and in online manuals. Of course, our shop lost the manual. Thank for any help!!!

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2012
    Location
    The Netherlands
    Posts
    392
    Downloads
    0
    Uploads
    0

    Default Re: MPX 200i tap cycle

    Hi,

    I assume you have a YCM, on my MXP-100i it is something like:
    Alert >>>> Metric example for rigid tapping with a M10 x 1.5 metric tap !!!!!!
    ....
    G95 ( MM/REV )
    M29 S300
    G84 Z-20. R3. F1.5
    G80
    G94 ( BACK TO MM/MIN )
    ....

    - or

    ....
    G94( MM/MIN )
    M29 S300
    G84 Z-20. R3. F450. ( F=300X1.5 )
    G80
    ....

    - or G120 P1 cycle for Bolt Hole Circle Pattern for Drilling (G73-G81) or Tapping (G84):

    ....
    G94( MM/MIN)
    M29 S300
    G84 Z-20. R3. F450. K0 ( F=300X1.5 )
    G120 P1 X0. Y0. D100. A0. K6
    G80
    ....

    ( P1 = BOLT HOLE CIRCLE )
    ( X,Y = CIRCLE CENTRE )
    ( D = CIRCLE DIAMETER )
    ( A = FIRST ANGLE )
    ( K = NUMBER OF HOLES )

    Last edited by Heavy_Metal; 11-07-2022 at 01:54 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MPX 200i tap cycle

MPX 200i tap cycle