Dataserver technical info - Fanuc 18MC


Results 1 to 7 of 7

Thread: Dataserver technical info - Fanuc 18MC

  1. #1
    Member
    Join Date
    May 2022
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Dataserver technical info - Fanuc 18MC

    Hi all,
    I am just wondering if anybody can direct me to information regarding the communication protocol between Dataserver and CNC boards, and the pinout of the backplane connectors.

    To clarify, the dataserver board in my 18MC has died. This a home-shop machine and the cost of obtaining a replacement board here in NZ is prohibitively expensive.
    I do embedded programming, so for fun I would like to attempt to interface in something a bit more modern, available and affordable to act as the dataserver, but for that I require said technical info.

    I understand if this is proprietary Fanuc info that no one can give me, but thought I would ask anyway.
    Thanks in advance.

    Similar Threads:
    Last edited by WarpCore; 07-23-2022 at 03:48 PM. Reason: clarify wording


  2. #2
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1379
    Downloads
    0
    Uploads
    0

    Default Re: Dataserver technical info - Fanuc 18MC

    Send me an email: cnc @tulipmemory.com



  3. #3
    Member
    Join Date
    May 2022
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Dataserver technical info - Fanuc 18MC

    Thank you for the reply, I have sent you an email.



  4. #4
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1379
    Downloads
    0
    Uploads
    0

    Default Re: Dataserver technical info - Fanuc 18MC

    Send the schematics but email won't go through.



  5. #5
    Member
    Join Date
    May 2022
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Dataserver technical info - Fanuc 18MC

    Oh darn, that's disappointing. Well thank you for trying. If it's not too much bother may I try again with a different email?



  6. #6
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1379
    Downloads
    0
    Uploads
    0

    Default Re: Dataserver technical info - Fanuc 18MC

    Done.



  7. #7
    Member
    Join Date
    May 2022
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Dataserver technical info - Fanuc 18MC

    Thank you, very much appreciated.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dataserver technical info - Fanuc 18MC

Dataserver technical info - Fanuc 18MC