Need Help Hitachi Seiki with Fanuc 6T

[cic1081]

Dear Brothers
I have a CNC Turning center Hitachi Seiki with Fanuc 6T control. The problem is, after a long time almost 6 moths, I turn on this machine. Machine is ON very fine but axis are moving only with hand wheel only. No JOG, no Home, no MDI. Only Hand wheel is working. Can anybody help me to find and solve this problem? I shall be very thankful to you guys. Thanks

Similar Threads:

• Need Help Hitachi Seiki Fanuc 6T
• Need Help!- Hitachi Seiki with Fanuc system 10 TE-F
• Hitachi Seiki VS 60 Fanuc 18
• Hitachi Seiki w/ Fanuc 18 C

[machinehop5]

...possible stuck Button on keyboard buttons

[Brunocnc28]

Fanuc pmc model or Micon8 ?



UOTE=machinehop5;2515364]...possible stuck Button on wakeboard buttons[/QUOTE]