manual sent.
Stevo
Please, i need the fanuc 0T manual too.. can anyone send me a copy. my email is
sistemas@frmaquinaria.com
regards
felipe ramirez
manual sent.
Stevo
Stevo...
i reaaly apreciate your fast answer... thanks.. i will ask you some questions.. do you know how to make a backup of my parameters.. i have a Miyano BNC 34A Fanuc OT, lathe. i want make a backup to avoid loose the parameters..
regards.
felipe
Attached is a procedure for backing up your control.
Stevo
Thanks again Stevo1... let me try to backup my cnc lathe and then post what happened.
Stevo1, like i said before i have a Miyano BNC34A, i was looking for another lathes like this and found this picture , when i turn it on my cnc lathe never show the text on the screen like the text in this picture, (the text is inside the white circle) do you know how can i activate this text and the buttons to work. when i hit one of this buttons nothing happened.,
So what you have circled is actually displayed on your control but when you press it nothing happens or you don’t have that display at all?
If they are there and they do not work it is rather odd. IIRC if any kind of option was not active it would not give you the choice at all. PM me your 900 parameters and I will see what I can come up with.
Stevo
No its not displayed, the picture is not from my cnc lathe, i want to know if i can display this on my cnc lathe. i will take a picture of my display to show you the diference.
Thanks again.
Felipe
PD. sorry about my english.
Felipe,
Your english is fine.
That is odd that it is not displayed. Send me a PM of your 900 parameters.
Stevo
Stevo1.
this is the picture of my cnc lathe , how you can see, i did not have the text like the first picture marked with a white circle
tnx
felipe
I see.
I got your PM and that is what I was looking for. I will see what I can come up with and get back to you.
Stevo
HI again Stevo..
can you see why my cnc lathe don´t display the text for the screen buttons...
regards.
felipe
Felipe,
Sorry for the late reply. I looked at what you had and nothing indicated to me that this is an option on the control. I am not quite sure why that is not displayed.
I would suggest that you start a thread with a title that fits your problem.
Stevo
I have a 1994 Citizen L20 with the Fanuc OT series control.
Can someone please email me the Fanuc manual?
Thanks in advance!
jbcole@triad.rr.com
Looking for the PDF version of the Miyano Turning Center Operator and Programmers manual. Please send to ronmarc58@gmail.com.
Can i get Fanuc OT manuals pdf please !!!
Thanks !!!
gluhacevic@net4u.hr
Can someone send me Fanuc OT Operator and Maintenance Manual, please..
palani.prabhu@gmail.com
Hello!
Can someone send me manuals for Leadwell LTC-10s ? Fanuc series O-T
i send my e-mail on PM
Thanks
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
i am looking for the Fanuc manuals for the series O-T controler. does anyone have these in PDF form?
Thanks in advance, Bill
bsykes@centalmm.ca
geez! this is another thread that makes me laugh when a new post is added asking for common manuals.
have any of you newbies heard of 'google' ????????
try searching "fanuc 0t manual filetype:pdf"
you might be surprised what comes up.....