Need Help! G71 canned cycle is not retracting off of the part.


Results 1 to 2 of 2

Thread: G71 canned cycle is not retracting off of the part.

  1. #1
    Member
    Join Date
    May 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default G71 canned cycle is not retracting off of the part.

    Hi, I need help figuring out why my machine (daewoo puma) fanuc 16i series, is acting weird during a G71 canned cycle. After it finishes the profile pass, instead of retracting off of the part, it goes backwards on the profile again before going off of the part. I suspect a parameter has been changed to make it do this because it didn't use to do it before. I nearly crap my pants the first time I saw it go backwards down the profile it just finished cutting. It uses a rapid move when it's going backwards on the profile. I'm fairly new to cnc machining so any help would be great and it would make my job a whole lot easier

    Similar Threads:


  2. #2
    Member CNCRim's Avatar
    Join Date
    Feb 2006
    Location
    usa
    Posts
    991
    Downloads
    0
    Uploads
    0

    Default Re: G71 canned cycle is not retracting off of the part.

    post your code here?

    The best way to learn is trial error.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G71 canned cycle is not retracting off of the part.

G71 canned cycle is not retracting off of the part.

G71 canned cycle is not retracting off of the part.