Fanuc 32i spare outputs inputs, to connect airblast

[noexit]

Hi Everyone

Machine DMC 635V fanuc 32i control.

i want to add airblast from M code activated, i asked Deckel Maho but they say that it is not possible for this machine, but i don't believe.
Always is spare output, my opinion.

maybe some one do this? Can help me find that i need

Similar Threads:

• Solved Fanuc 18i-TB Memory Card Only Inputs, Not Outputs
• Newbie- G540 inputs and outputs voltage
• Need Help please with Inputs and Outputs
• inputs outputs
• Inputs/Outputs

[zavateandu]

you need to post the ladder so we can check what M code are spare

[noexit]

you need to post the ladder so we can check what M code are spare

Thanks for response i will try to take ladder but it is password protected, DMC 635V 2006 milling machine .
I try to search web for password and return

[Dale123]

Normally 4 on the 32I are spare for External M code . Check ladder for M91 to M94 and see of they are there .

[noexit]

Normally 4 on the 32I are spare for External M code . Check ladder for M91 to M94 and see of they are there .

https://imgur.com/a/73fOPlI

like you see in link there are M50 but i dont know how to activate it

[zavateandu]

Thanks for response i will try to take ladder but it is password protected, DMC 635V 2006 milling machine .
I try to search web for password and return

password is no problem ,just link it here

[noexit]

password is no problem ,just link it here

maybe you know that parameter to set that i can donwload view ladder?