Turret spins continuously when my program calls tool #8 Fanuc OT Hwacheon HiEco10

[78sharpshooter]

I tried to run a new program which calls up tool 8 (havent called it up before in a program, section is pasted below), and the turret just spins. I tried resetting and powering off and on and cant get around this. Its strange because in MDI I can call up tool #8 without issue

(DRILL2)
N405 M1
N410 T0808
N420 M8
N425 G98
N430 G97 S2292 M3
N435 G0 X0. Z0.6
N440 G0 Z0.2
N445 G81 X0. Z-0.135 R0.165 F13.3
N450 G80
N455 Z0.6
N460 M9
N465 G0 X5.0 Z5.0

Similar Threads:

• Using FTP to continuously use the same program name
• Macro tool offset or tool R adjustment Hwacheon Lathe Fanuc 0i-TD
• Syntec6MB - Tool change macro calls wrong turret pos after reboot Signkey Feho 1530WS
• Need Help!- Hwacheon Cutex 240 live tool turret alignment
• Fanuc 18t weird tool offsets, Hwacheon lathe

[CNCMAN172]

Why is line N410 requesting tool #0808, do you really have 808 tool positions?