Takisawa TC-1 Fanuc 0-TC PMC parameters

[bip1988]

Good evening all, first time on here.
I have a 1993 TC-1 that has had its parameters deleted. I have all the parameters that were punched out, however the PMC parameters 900-939 weren't recorded. If anyone has a copy it would be much appreciated.
Regards
Brad.

Similar Threads:

• Need Help!- DGN parameters Nakamura Tome TMC15M Fanuc OTC PMC-M how to enter PMC parameters?
• Need Help!- Takisawa TS-30 parameters for Fanuc 10T
• Fanuc 3T parameters! (Takisawa TC 2)
• Need Help!- Lost parameters for Takisawa fanuc 3t
• Build Thread- Need Parameters TAKISAWA TC1 FANUC

[memoryman]

parameters 900-939 are options, The PMC parameters are called DIAGNOSTICS (parameters 300 on).

[bip1988]

Thanks for your response. Sorry, my mistake. In the print out i have there is a gap between 899 and 940. So i have the Parameters excluding the 900-939, also I don't have the diagnostics settings.

[bip1988]

I have managed to source some parameters/diagnostics for this machine. The issue i have now is that the ones I received appear to be for an 8 tool turret, however I have a 12 tool turret. Any idea which parameter/diagnostic number this may be?

[zavateandu]

try with diagnose 440,450,455 to set up the 12 tools

[Peacock88]

Thank you zavateandu.
I have found out that on this machine it is D435.7.
Once the machine is confirmed running ok, i'll look at posting an updated list for the PAR and DGN.