MAKINO FNC-208 with FANUC 6


Results 1 to 2 of 2

Thread: MAKINO FNC-208 with FANUC 6

  1. #1
    Member
    Join Date
    Aug 2005
    Location
    United States
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default MAKINO FNC-208 with FANUC 6

    Hello,

    Accidentally, we deleted the tool change macro / program from the machine.
    Do any of the experts here may have a copy, or steer me in the right direction how to start.
    All i remember is that the program was numbered in the 9XXX's

    Any help would be greatly appreciated

    Peter

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2007
    Location
    Canada and Nothern ireland
    Posts
    351
    Downloads
    0
    Uploads
    0

    Default Re: MAKINO FNC-208 with FANUC 6

    Take a look in the Parameter Area that calls the 9000 programs and see which one is calling M6 -------------Parameter in the Area of 320 to 322 ? This gives you one of three options for program numbers ----- 9000 or 9001 09002 so write a small program with them numbers and see which one gets called up and then that is were you need to put your information in for M^ control



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MAKINO FNC-208 with FANUC 6

MAKINO FNC-208 with FANUC 6