Need Help! Amada Fanuc PEGA 357 no booting


Results 1 to 15 of 15

Thread: Amada Fanuc PEGA 357 no booting

  1. #1
    Member Neozebulon's Avatar
    Join Date
    Sep 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Amada Fanuc PEGA 357 no booting

    Hi ,
    I've got a problem with Amada pega 357 punch turett,
    Error e05 s-memory(low) parity error
    I phone Amada and say me motherboard was died and 3 other cards for a total of 30000$ .
    It's too much for my society.
    Can you help me ?


    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Amada Fanuc PEGA 357 no booting-1631525624074-jpg  


  2. #2
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1245
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    Give more info on the control please: photos help.



  3. #3
    Member Neozebulon's Avatar
    Join Date
    Sep 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    Hello ,

    It's fanuc O4PC

    If that help you for find my problem.

    The boot screen is freeze with the error E05 , but i can do origin axis .

    The machine is connect to old pc win95 on a box named "adr inc"

    Thanks

    Attached Thumbnails Attached Thumbnails Amada Fanuc PEGA 357 no booting-1-jpg   Amada Fanuc PEGA 357 no booting-2-jpg   Amada Fanuc PEGA 357 no booting-3-jpg   Amada Fanuc PEGA 357 no booting-4-jpg  

    Amada Fanuc PEGA 357 no booting-5-jpg  


  4. #4
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1245
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    Thanks. Although that control is essentially a Fanuc 0-C control, I am not familiar with the "Error e05 s-memory(low) parity error" that type of an alarm has always been a 'fatal' one: no machine operation could be done until the alarm was cleared.
    Do you have a recent backup of the programs, parameters and diagnostics?



  5. #5

    Default Re: Amada Fanuc PEGA 357 no booting

    I was thinking 10/11/12 or 15A with the connection unit there. Some form of very early MMC or Front end interface hybrid.



  6. #6
    Member
    Join Date
    Dec 2015
    Location
    United States
    Posts
    108
    Downloads
    32
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    Try to replace memory board only & after press+ cancel+ del button or del+rest. Hope you successfully boot O-C controller. My guess have any track is missed in memory board.

    quick-cnc


  7. #7
    Member Neozebulon's Avatar
    Join Date
    Sep 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    Quote Originally Posted by memoryman View Post
    Thanks. Although that control is essentially a Fanuc 0-C control, I am not familiar with the "Error e05 s-memory(low) parity error" that type of an alarm has always been a 'fatal' one: no machine operation could be done until the alarm was cleared.
    Do you have a recent backup of the programs, parameters and diagnostics?

    Hello i've got this program (in attachement), but i 'don't kown if are just maccro or pms parameter and maccro , it's chineese language for me

    Today i have deleted memory , RESET + DELETE button at boot , the error is always here

    I show you all the cards that Amada wants to sell to try to fix my machine.

    How can i replace memory ? i dont 't know where it 'is.

    Thanks for help me

    Attached Thumbnails Attached Thumbnails Amada Fanuc PEGA 357 no booting-devis-carte-pega-jpg  
    Attached Files Attached Files


  8. #8
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1245
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    The memory chips are soldered and also socketed on the MEM BOARD, (A16B-1212-0210) There are also various other chips on that board involved in the memory area; it's likely that the problem is on that board.
    What country and city are you in?



  9. #9
    Member Neozebulon's Avatar
    Join Date
    Sep 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    If i remove the memory card (A16B-1212-0210) , i loose all machine parameters ? (PMC) ?
    I am in France in "le Mans"



  10. #10
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1245
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    The backup battery is connected to the mem.board; you have 'some' time (hours?) before losing the data after unplugging the battery. (there is capacitor on the mem.board for that). The parity alarm means that you lost the data anyway.



  11. #11
    Member Neozebulon's Avatar
    Join Date
    Sep 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    OK, I will see to have the memory card checked,
    For the machine parameters, I found some old numbered paper tape, I think it's the parameters but I have no idea how to use the tape reader.



  12. #12
    Member Neozebulon's Avatar
    Join Date
    Sep 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    Hello ,

    Always with my problem on my Fanuc 04C

    I unplug the memorycard , clean and check it , i see nothing.
    But when i plug it , i have a new screen error at boot.

    I think the eprom slot 3 is died ? it's good ?
    Where i can find the microprogram 0156 FC1C if my diagnostic it's correct.

    Attached Thumbnails Attached Thumbnails Amada Fanuc PEGA 357 no booting-1634739302728-jpg   Amada Fanuc PEGA 357 no booting-1634739302739-jpg  


  13. #13
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1245
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    You have lost all volatile data: parameters, programs, diagnostics etc.
    Turn the control ON while holding RESET and DELETE buttons;the reload parameters and diagnostics.



  14. #14
    Member Neozebulon's Avatar
    Join Date
    Sep 2021
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Amada Fanuc PEGA 357 no booting

    Quote Originally Posted by memoryman View Post
    You have lost all volatile data: parameters, programs, diagnostics etc.
    Turn the control ON while holding RESET and DELETE buttons;the reload parameters and diagnostics.
    Already done but I cannot start the machine without the error screen.



  15. #15
    Member
    Join Date
    Dec 2015
    Location
    United States
    Posts
    108
    Downloads
    32
    Uploads
    0

    Default

    Quote Originally Posted by Neozebulon View Post
    Already done but I cannot start the machine without the error screen.
    Please share the picture of full Masterboad.

    quick-cnc


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Amada Fanuc PEGA 357 no booting

Amada Fanuc PEGA 357 no booting

Amada Fanuc PEGA 357 no booting