Need Help! Colchester CNC 500, Fanuc 3T parameters


Results 1 to 3 of 3

Thread: Colchester CNC 500, Fanuc 3T parameters

  1. #1
    Member
    Join Date
    Oct 2017
    Location
    Australia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Colchester CNC 500, Fanuc 3T parameters

    Hi Everyone,

    I have an old Colchester CNC 500 which developed a memory fault and lost ALL parameters. I have a backup of the User parameters but not the important Options and Diagnostic parameters which are normally listed in the NC documents in the rear cabinet.

    I 'd be grateful if anyone with the same machine would share their settings, otherwise I think its very dead.

    Thanks,

    Ian.

    Colchester CNC 500, Fanuc 3T parameters-dsc_1422-jpg

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Colchester CNC 500, Fanuc 3T parameters-dsc_1422-jpg  


  2. #2

    Default Re: Colchester CNC 500, Fanuc 3T parameters

    I hope someone can help you out.
    If not, I think for that series there are only 6 bytes of options (2 groups). Wouldn't take long to go through and find the few you may need if any.
    A few hours of time for the machine will be cheaper than a re-control or new machine.



  3. #3
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    506
    Downloads
    0
    Uploads
    0

    Default Re: Colchester CNC 500, Fanuc 3T parameters

    Send me a pm I'll see what I can do



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Colchester CNC 500, Fanuc 3T parameters

Colchester CNC 500, Fanuc 3T parameters

Colchester CNC 500, Fanuc 3T parameters