Problem PS191 alarm fanuc 6M


Results 1 to 4 of 4

Thread: PS191 alarm fanuc 6M

  1. #1

    Default PS191 alarm fanuc 6M

    so I have had this before in the past and never really been able to figure out the problem ,,, randomly when running a g03 it throws this PS191 alarm ,.,
    Accumax with 6M fanuc PS191 alarm  fanuc  6M-20210817_124759-jpgPS191 alarm  fanuc  6M-20210817_122633-jpg

    Similar Threads:
    accumax 11M , Hitachi seiki 3NE 6T , TAKISAWA MAC-V410 15M , CITIZEN F25 , WASINO Lj-63m 10T


  2. #2

    Default Re: PS191 alarm fanuc 6M

    not sure why I said 6M ,, its a 11M

    accumax 11M , Hitachi seiki 3NE 6T , TAKISAWA MAC-V410 15M , CITIZEN F25 , WASINO Lj-63m 10T


  3. #3
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    787
    Downloads
    0
    Uploads
    0

    Default Re: PS191 alarm fanuc 6M

    An arc, where the difference of radius values at start point and end point is larger than the parameter set value, was specified. (parameter No. 2410) Fanuc book says modify the program.



  4. #4

    Default Re: PS191 alarm fanuc 6M

    well yes , I did read what the code meant .. I just dont see how it could be causing a problem . The 11M manual shows that is a acceptable code

    accumax 11M , Hitachi seiki 3NE 6T , TAKISAWA MAC-V410 15M , CITIZEN F25 , WASINO Lj-63m 10T


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PS191 alarm  fanuc  6M

PS191 alarm  fanuc  6M

PS191 alarm  fanuc  6M