Hi guys, I'm trying to run a simple z-face probing routine with a Renishaw MP3 on my Fanuc 6MB. When the program gets to N50 (see code below), alarm 78 triggers. I know the alarm is for a macro that is not there, but cannot find what the actual macro is. (PROBE Z-face) N30 T2 M06 N35 G54 N40 G00 X4.25 Y1.5 N45 G43 Z6. H02 N50 G65 P9832 <---------------------- Alarm 78 N55 G65 P9810 Z3. F39.4 Any help would be great, ThanksSimilar Threads:Need Help!- Hardinge SB-3 GN goes into E-Stop after and hour of running with no alarm numberNeed Help!- Haas Mill Stop No Alarm Spindle running Running Fanuc OiMD in MDI Mode while in Alarm State Alarm- Spindle not running- discovery 308 149 alarm spindle running need help!!!
View Tag Cloud
Forum Rules