Service password

[vitini79]

Hello, does anybody knows the service password to a FAMUP MCL120 machine with fanuc 18i?

I have to adjust the Z position to tool change and on the tool change menu asks for an password.

Tanks

Similar Threads:

• service password
• Just IN- Arburg service level password
• LNS sprint service password

[lshingleton]

Tool Change position as in G30 ? Fanuc should be open to adjust that but the machine builder may have locked the control some way

[phucrobusl]

Tool Change position as in G30 ? Fanuc should be open to adjust that but the machine builder may have locked the control some way

Send me your PMC file to rd181993@gmail.com
I will give password.

[vitini79]

The builder of the machine made an coustum menu with some hidden macro and blocked with service password.

[lshingleton]

There Menu can do what ever it wants but if its for a Fanuc control for an ATC it will be coming from 2nd Ref position and thats an easy found parameter on the Fanuc side ?------------When commanded in the program does it go -----Goo G30 Z0.or G30 xo yo ?----------If so there program has to use the numbers from the Fanuc side for 2nd ref -------Parameter 1241 should give you the numbers to see if this is were they are coming from

[phucrobusl]

The builder of the machine made an coustum menu with some hidden macro and blocked with service password.

Okay no problem just contact me on rd181993@gmail.com i will help you

[freakycnc]

how about G10 L50 N1241 or 1850 P3 R xxxx.xx to re-write the value? Check the Fanuc 18i operators manual.

[lshingleton]

Usually Axis Values can only be read from like the G30 and First Ref and stuff but it good thinking and alot of parameters can be written to that way