Fanuc 6M, motor Z no move


Results 1 to 2 of 2

Thread: Fanuc 6M, motor Z no move

  1. #1
    Member Remaga's Avatar
    Join Date
    Sep 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Fanuc 6M, motor Z no move

    Hello, have a Center Moriseiki witth Fanuc 6M control. Can move the X, Y axis, but i no can move the Z axis, but the indicator DRO in screen yes move, but motor Z is stopped. No alarm of servo Z, ENBL1,2 of servo Z closed, alarms OVL1,2 close, VRDY1,2 close. But voltage comand VCMD-EC always is 0.19v. Some idea for what cnc no send comand a servo, or what check should i make ?

    thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2012
    Location
    USA
    Posts
    47
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc 6M, motor Z no move

    Remaga,
    Sounds like Z axis neglect is on. If position screen for Z changes and no physical motion when in manual/jog/handle.
    DGN 101 bit 5 should be a zero.
    Is there a switch on the operators panel? Z Neglect?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 6M, motor Z no move

Fanuc 6M, motor Z no move

Fanuc 6M, motor Z no move