Fanuc O-M (Dahlih MCV-610) tool change issues.

[eMTea]

Hi!
Newbie here, still learning my Fanuc 0-M controller.

I'm trying a test G-code to do too changes and tool length offset.
The post is done in Fusion 360.

Tool changes works perfectly in MDI mode, but not when received from the G-code in the memory. (Cant attach videos here).
When machine starts the G-code from the memory, it goes through the lines, and stops at the tool change line, and "BUF" is lit up in my screen.

For the record, I accidently deleted my O9000 program, but I had a backup, so it is back in the machine now, attached some photos of these for reference.
https://www.cnczone.com/forums/attac...1&d=1619262181
https://www.cnczone.com/forums/attac...1&d=1619262181

Anyone familiar with this issue?
I'm thinking this has to do with internal macro, but I have no idea how to troubleshoot this code.


Similar Threads:

• dah lih mcv 610 parameter issues fanuc 10m
• dahlih mcv 610 fanuc 10m need pc parameter
• Need Help!- Fanuc 10M on Dahlih MCV 760.