SYSTEM DATA SAVE

[Sokul]

I want to know how to save a Memory card
Power Mate i -MODEL H
A02B 0259 B501


FILE DIRECTORY
1 NC BASIC
2 PMC1OPT1
3 PMCAOPT2
4 PMC0BSC
5 NC1 OPTN
6 DG2SERVO


Thank you.

Similar Threads:

• read out time over system data
• Need Help!- Fanuc 18i-ma system data
• SRAM backup VS System data save
• System Commissioning Data

[agering]

For load and save the system files you need to actuate the extended menu of Boot Loader.

[Sokul]

For load and save the system files you need to actuate the extended menu of Boot Loader.

I use the touch screen version, so it has the difference of the command button.

FANUC A02B-0259-C213 LCD W/ TOUCH PANEL

[agering]

Your touch panel is connected through HSSB board as panel i?

[Sokul]

Can the file system be saved to the memory card? I tried and there was a recording error. The is protected file .

FILE DIRECTORY
1 NC BASIC
2 PMC1OPT1
3 PMCAOPT2
4 PMC0BSC
5 NC1 OPTN
6 DG2SERVO

[harie_2008]

For load and save the system files you need to actuate the extended menu of Boot Loader.

Dear Sir,

do you have Fanuc 21i_TB NC BASIC system data?

thanks

[agering]

Dear Sir,

do you have Fanuc 21i_TB NC BASIC system data?

thanks

Hi,
Please, tell me hardware configuration of your system.

[alpp00]

Can the file system be saved to the memory card? I tried and there was a recording error. The is protected file .

FILE DIRECTORY
1 NC BASIC
2 PMC1OPT1
3 PMCAOPT2
4 PMC0BSC
5 NC1 OPTN
6 DG2SERVO

Did you manage to backup system data save? I need same thing now.

[zavateandu]

there are many version of the NC basic so you need to know what version you have from data sheet paper.
Loading another version of NC BASIC will fail to boot the controller
Fanuc is giving these files with a service visit to your machine.
good luck