Macro transfer in fanuc 6m

[CAMPAXD]

Good morning,
i just had a problem with the control of the fanuc 6M and I have to transfer the macros to the control.
So that there is a procedure but not the memory ... can someone help me?
infinitely thank you

Similar Threads:

• FANUC MACRO COMPILER / Macro executor
• PC to Fanuc File Transfer
• Fanuc 20 DNC transfer
• Testing program for Macro (Fanuc Macro B)
• Convert Fanuc Macro to Fadal Macro

[lshingleton]

You have the Macros?
There is a Macro Screen on the 6M ?
Can you output them at all what is in there ?

[tridnt]

ay o hey hows it going

6t here random question for you guys about the program directory relating to 071 error

[lshingleton]

Error 71 ----------------The Address to be searched for was not found ---------------means the program or macro address is not there

[tridnt]

Error 71 ----------------The Address to be searched for was not found ---------------means the program or macro address is not there

so i had an issue where an operator went about fixing this error and wiped programs that were in the machine since we got it, now it wont let me put in more than two programs when we had at least 10 decent sized ones.

throws the 71 error even though program name is not taken in the machine

[lshingleton]

Lost programs or Parameters ?
There is Parameters related to memory size

[tridnt]

Lost programs or Parameters ?
There is Parameters related to memory size

as far as i know we lost the programs and not the parameters... but we do not even have the parameters for that controller

[lshingleton]

There is an optional parameter i think increases the memory size thats why i ask
When your are the machines create 3 or four sub programs with almost nothing in it and see if the control can recognize them
M98 P8000
M98 P8001 and just put and M99 in the subs for return --Will show if its memory size or something else

[tridnt]

There is an optional parameter i think increases the memory size thats why i ask
When your are the machines create 3 or four sub programs with almost nothing in it and see if the control can recognize them
M98 P8000
M98 P8001 and just put and M99 in the subs for return --Will show if its memory size or something else

Your hunch was right threw the same 071 alarm while trying to make the sub program, there are no prior sub programs in the control

- - - Updated - - -

Your hunch was right threw the same 071 alarm while trying to make the sub program, there are no prior sub programs in the control

That's the controller I'm working with

[lshingleton]

Yes and just uses the RS232 port for communication
Optional Parameters are the 900s if i remeber right lol

[tridnt]

Yes and just uses the RS232 port for communication
Optional Parameters are the 900s if i remeber right lol

Yeah we have two the controllers are like a year apart or something they are OM machines though, they said they are the only two in the states. It's been fun getting them back up and peeling steel.

[tridnt]

Yeah we have two the controllers are like a year apart or something they are OM machines though, they said they are the only two in the states. It's been fun getting them back up and peeling steel.

We ended up just wiping the programs on it, and starting fresh. So far no issues.

[lshingleton]

That controller is a 6T ?---------Big difference from 6t to the O controls in parameter and settings -----Anyway you have a great time and yes been along time since i worked on them controls when new lol