robodrill power on status


Results 1 to 2 of 2

Thread: robodrill power on status

  1. #1
    Member
    Join Date
    Apr 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default robodrill power on status

    Hi guys,

    I have 2001 Robodrill the controller is Fanuc 16iMb.
    Power on default is 100% rapid (48m/min). Would there be a parameter which I could change to default it to 25% and still have option for 25%,50% and 100% on panel.

    Thanks in advance
    Dave

    Similar Threads:


  2. #2

    Default Re: robodrill power on status

    Power on the machine, press the quick NC button. Under maintenance soft key there are options to adjust how the machine turns on. To what screen its starts up in, rapids, etc. Change the settings there.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

robodrill  power on status

robodrill  power on status

robodrill  power on status