I think , real alarm/error is
PC050 IOLINK ER1 CH1:GR00:03
Hi, we need you help to solve my problem on Fanuc Oi-D alarm "SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR" suddenly appear after about one hours running. Attached are the picture of alarm
Similar Threads:
I think , real alarm/error is
PC050 IOLINK ER1 CH1:GR00:03
https://www.facebook.com/okuma.tuning
I don't know but it seems PLC error.
https://www.facebook.com/okuma.tuning
one of the I/O device is offline,maybe a fuse blown on the device,possible you have a short somewhere on the wires
I shutdown the machine and ON again after that the alarm PC050 IOLINK ER1 CH1:GR00:03 not appear anymore (like normal booting) but alarm display in the following
OT alarm
Turret alarm
Emergency alarm
I checked X input on the io status all the bits 0 that means the io not working.
whe
???????????
HELLO COULD YOU HELP ME, I HAVE THIS INTERMITTENT ALARM IN MY MACHINE ..... FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR .... WE RESET IT AND RESET BUT STILL WE CANNOT FIND ANY SHORT OR FUSE DAMAGED
FANUC SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR results
- - - Updated - - -
FANUC SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR results
Hi!
How could you find the failure?
I had a similar mistake in a fanuc controller, I check I/O link controller but nothing seems weird