Fanuc Parameter Backup3.5” Floppy


Results 1 to 3 of 3

Thread: Fanuc Parameter Backup3.5” Floppy

  1. #1
    Member Redarress's Avatar
    Join Date
    Feb 2021
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Fanuc Parameter Backup3.5” Floppy

    Hi
    Trying to read the parameter backup 3.5”Floppy for a Fanuc O-Mate (cheaper version of the OM). Keep getting warning that the disc is not formatted. Could this be that FAnuc used a floppy drive with a 300rpm rather than the usual 360rpm used with HD ? If so does anyone know where I can get such a floppy drive from ?

    Thanks

    Similar Threads:
    Last edited by Redarress; 02-09-2021 at 07:01 AM.


  2. #2
    Member
    Join Date
    Dec 2009
    Location
    ROMANIA
    Posts
    947
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc Parameter Backup3.5” Floppy

    better post the model and type of the machine and we could get an electronic copy of the back up for you.



  3. #3
    Member Redarress's Avatar
    Join Date
    Feb 2021
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc Parameter Backup3.5” Floppy

    Quote Originally Posted by zavateandu View Post
    better post the model and type of the machine and we could get an electronic copy of the back up for you.
    Hi ,
    Thanks for responding.. Its for a Cincinnati Sabre 500 1993 year

    Many Thanks .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc Parameter Backup3.5” Floppy

Fanuc Parameter Backup3.5” Floppy