Mori seiki PMC-C,15TF

[baonam2019]

I have a CNC lathe, Moriseiki machine company, Fanuc 15TF operating system. Every time the machine has an error, I don't find any ALarm bit in address A that turns up to be 1. I don't understand how they write the PMC that controls the error bit. Please tell me how to use this carrier's error message. I have some pictures of the machine. Thank you.

Similar Threads:

• Need Help!- Mori Seiki SL25B Fanuc 15TF
• Mori Seiki MV-40M
• Need Help!- Kia (Hitach / Morii Seiki) 4NE-600 CNC Lathe Fanuc 15TF NEED ELECTRICAL SCHEMATICS
• Problem- Did Mori Seiki Buy Hitachi Seiki?
• MORI SEIKI SL 153

[tuanpq]

Lack of lubricating oil


Sent from my iPhone using Tapatalk

[drdos]

You have a softkey Called Pascal. If you press that button and see data then that machine has Pascal. Pascal is language that is hidden and protected by the machine tool builder. It can read and write everything that is in the ladder including displaying it's own messages. It makes troubleshooting alarms difficult.

[baonam2019]

You have a softkey Called Pascal. If you press that button and see data then that machine has Pascal. Pascal is language that is hidden and protected by the machine tool builder. It can read and write everything that is in the ladder including displaying it's own messages. It makes troubleshooting alarms difficult.

hi, how can I open and read pascal program that is nested in ladder, please help me to understand more about it. thanks

[drdos]

hi, how can I open and read pascal program that is nested in ladder, please help me to understand more about it. thanks

You can't. Pascal is upper level language. Machine tool builders use this because it takes less memory and is safeguarded. Also allows them to have customer screens. If you press the PCMDI soft key you will see a custom screen IF the machine tool builder has created one. You don't have to have a customer screen to use Pascal

[tuanpq]

Buy software from Fanuc.


Sent from my iPhone using Tapatalk

[baonam2019]

You can't. Pascal is upper level language. Machine tool builders use this because it takes less memory and is safeguarded. Also allows them to have customer screens. If you press the PCMDI soft key you will see a custom screen IF the machine tool builder has created one. You don't have to have a customer screen to use Pascal

So, when fixing errors generated from PMC of this machine, we cannot detect it on Ladder program written on machine? Can we just translate the message displayed on the screen to find the cause?

[baonam2019]

Buy software from Fanuc.


Sent from my iPhone using Tapatalk

what software?

[drdos]

So, when fixing errors generated from PMC of this machine, we cannot detect it on Ladder program written on machine? Can we just translate the message displayed on the screen to find the cause?

Pretty much.

[baonam2019]

Pretty much.

I don't really understand what you mean

[tuanpq]

I don't really understand what you mean

Có ngh?a là nhi?u ti?n ?y.


Sent from my iPhone using Tapatalk

[tuanpq]

what software?

About 10k$


Sent from my iPhone using Tapatalk

[baonam2019]

About 10k$


Sent from my iPhone using Tapatalk

? ?