Lack of lubricating oil
Sent from my iPhone using Tapatalk
I have a CNC lathe, Moriseiki machine company, Fanuc 15TF operating system. Every time the machine has an error, I don't find any ALarm bit in address A that turns up to be 1. I don't understand how they write the PMC that controls the error bit. Please tell me how to use this carrier's error message. I have some pictures of the machine. Thank you.
Similar Threads:
Lack of lubricating oil
Sent from my iPhone using Tapatalk
You have a softkey Called Pascal. If you press that button and see data then that machine has Pascal. Pascal is language that is hidden and protected by the machine tool builder. It can read and write everything that is in the ladder including displaying it's own messages. It makes troubleshooting alarms difficult.
You can't. Pascal is upper level language. Machine tool builders use this because it takes less memory and is safeguarded. Also allows them to have customer screens. If you press the PCMDI soft key you will see a custom screen IF the machine tool builder has created one. You don't have to have a customer screen to use Pascal
Buy software from Fanuc.
Sent from my iPhone using Tapatalk