Fanuc 180i won't boot

[MohammedKhallaf]

Hi
I have a problem with the Fanuc Panel 180i-PB
as shown in video:



It won't boot the system... Can anyone help me to identify the problem and solution?

Similar Threads:

• Problem- Fanuc 180i Loop Counte
• Need Help!- Fanuc 180i/ New Ball screw
• pro engineer post processor fanuc 18i mb5 and fanuc 180i Ma
• post processor fanuc 18i mb5 and fanuc 180i Ma
• Need Help!- G68 Rotation problem on Fanuc 180i

[alexfanuc]

Do you have any alarm shown in the CNC ?
Regards

AlexFanuc

[MohammedKhallaf]

Do you have any alarm shown in the CNC ?
Regards

AlexFanuc

No, there are no alarms

[zavateandu]

the leds from the mainboard will tell you what kind of problem you have on the boot sequence.
if the cnc is on the back of your screen look on the left lower side for 6 leds and the sequence of leds will tell the problem
same if the cnc is stand alone and is on electrical cabinet

[MohammedKhallaf]

the leds from the mainboard will tell you what kind of problem you have on the boot sequence.
if the cnc is on the back of your screen look on the left lower side for 6 leds and the sequence of leds will tell the problem
same if the cnc is stand alone and is on electrical cabinet

In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.

[MohammedKhallaf]

In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.

There is *no* error in that

[zavateandu]

please post a photo of the leds

[alexfanuc]

In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.

Would you please take a photograph of the control? Also, please take a photograph of the back of the display.

Regards

AlexFanuc

[tuanpq]

In The electrical cabinet :
The Status segmet shows [ 0 ]
There are 7 LEDS as follow:
[ 1000 ]
[ 000 ]
there is error in that I think.

[1000] initialization completed, normal operation state.


Sent from my iPhone using Tapatalk

[PNaedele]

This looks like possibly an issue with the Windows boot loader?

I'm not sure on the steps, but maybe try to repair the installation with a Windows startup disc.