I have CNC parameters on my PC computer. Is there any option to load them from the memory card? I know how to do this, but I don't know what format the file should be in.
As I stated before: Loading system files and parameters should be done in MDI mode (default) and E-stop condition.
MDI mode is the default, so doesn't have to be selected.
Did you read the PDF file I sent you?
Enter option parameter first
Sent from my iPhone using Tapatalk
Yes, I have read your pdf.
I loaded cnc parameters and pitch error, but i have a problem with loading pmc parameters. When I try to upload PMC, I have alarm 087. (keep relay 17.1 to 1).
Where can I find them? do they start with parameter 60000? Do I have to change any parameter to make them visible?
In the attachment the PMC parameters that I have.
Can someone explain something to me?
I was able to upload cnc parameters to the machine only with PC parameters: Baudrate 4800, none parity, stop bit: 1, Baund rate 8. Other parameters didn't work.
I changed the parameters in Fanuc to different ones: baudrate to 4800 or 2400, par 0020 I/O channel: 1 or 0; parameter 0112 device no : for different values and it didn't affect the data upload. I do not understand it.
Last edited by pablowlkp; 01-11-2021 at 03:51 PM.
The PMC parameters have their own Baud Rate. It is either 4800 or 9600. Also when all memory has been cleared the channel switches to 0 it needs to be set to a . You have to find the soft key that says channel and type 1 then press the channel soft key.
Hello
Thanks for all to help. Problem was solded. Problem was solved. I got a backup from Fanuc because rs232 transmission is not possible.
hi , I think I will have the same troubles. Hope not, but I go t a Stama MC530 machine from 1994, and I will start setting it up slowly. I hope you guys here will be able to help me. I am really new to this thing. Of course I have to connect the machine to the electricity and see what will say before I can do anything.
Hi, today I connected the machine to the electricity and tried to start up. What I got was a blinking SU-01 code in the main NC unit. I heard that fan was spinning and nothing showed up on the display. I tried to press the green button on the display but nothing showed. Any ideas on what this is ?
Please post a picture with the led sequence form the MAIN