Good morning, I have modified an existing OEM custom screen using fanuc picture on my laptop. I have created a .mem file on my flash-drive. What steps do I take to download my new HMI project onto my Fanuc Series 35i Model B?
Thanks,
Similar Threads:
Yeah, I already have the file open and modified on fanuc picture software. Now how do I download it into the CNC?
I figured it out and just leaving these notes for anyone in the future for Fanuc 35i.
On fanuc 35i model B, you hold down the two right most soft keys to enter boot mode when powering on the machine. Then you go to user data loading and hit select, then move down to the .mem file of the project (the fanuc picture project file) and hit select, then hit yes. It will load the project file. Once completed, you can exit out of it by selecting "end" and "end" again on the main menu.
I had an issue where my fp driver (fanuc pic driver) was newer, so it wouldn't read my file. I had to repeat the above steps, but this time, I had to do it with the by27.mem file that was created when I created the .mem file for the fanuc picture project. Then only did my hmi project load successfully.
Also, I had to use a special compact flash pc card adapter and memory card, it wouldn't work with usb flash drive. Initially it would not read the file from the memory card, so I formatted the memory card on my computer, which made it readable for the cnc.
Hi,
Can i able to get link for Fanuc picture software ....?