Fanuc 21i-m memory card drip feeding


Results 1 to 2 of 2

Thread: Fanuc 21i-m memory card drip feeding

  1. #1
    Registered
    Join Date
    Dec 2013
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Fanuc 21i-m memory card drip feeding

    Help needed. Trying to drip feed program from compact flash card. I can load program from card to machine so i know I can access card. Unfortunately machine doesn't have enough memory. I have been pulling my hair out and reading various forums all relating to using m198 followed by p1234. Most forums mention
    %
    O0001;
    M198 P1234;
    M30;
    %
    How do I get the percentage sign before program number on machine? Do I need it?
    Is there a simple way on the 21i that I'm missing?
    What parameters do I need to change.
    Thanks in advance Robbie

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    765
    Downloads
    2
    Uploads
    0

    Default Re: Fanuc 21i-m memory card drip feeding

    ...more information link that might help ya
    Section 6.8
    https://www.cnc1.com/hubfs/fanuc-lib...put_Output.pdf



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc 21i-m memory card drip feeding

Fanuc 21i-m memory card drip feeding

Fanuc 21i-m memory card drip feeding