Need Help! FANUC 31i-b - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD


Results 1 to 1 of 1

Thread: FANUC 31i-b - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD

  1. #1
    Member
    Join Date
    Oct 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default FANUC 31i-b - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD

    Hey

    I am new to fanuc, and i want to DPRNT some information to a memory card. The problem is, that my machining program is on the memory card, and i use a sub program to call my machining program to my main program.
    But i want to dprnt some information when i am running the sub program (witch is in the memory card)
    When i use a dprnt inside that sub program i have this alarm "Fanuc Alarm 1808 DEVICE DOUBLE OPENED" .
    Anyone knows if it is possible to dprnt at the same time/ inside a sub program from the memory card?

    Thanks

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2016
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: FANUC 31i-b - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD

    It works with the DataServer. Have you tried using the DataServer?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FANUC 31i-b  - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD

FANUC 31i-b  - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD

FANUC 31i-b  - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD