FANUC 31i-b - DPRNT IN MEMORY CARD USING A SUB PROGRAM FROM THE MEMORY CARD

[puto_rafa]

Hey

I am new to fanuc, and i want to DPRNT some information to a memory card. The problem is, that my machining program is on the memory card, and i use a sub program to call my machining program to my main program.
But i want to dprnt some information when i am running the sub program (witch is in the memory card)
When i use a dprnt inside that sub program i have this alarm "Fanuc Alarm 1808 DEVICE DOUBLE OPENED" .
Anyone knows if it is possible to dprnt at the same time/ inside a sub program from the memory card?

Thanks

Similar Threads:

• Fanuc Series oi-MODEL D, Input a program from memory card
• Fanuc 18iMB program display while running subprogram from memory card
• Need Help!- Fanuc 16i-M memory card
• Edit program while DNC-ing it from memory card. Is it possible? (fanuc 18i mill)
• Starting of a program from a memory card

[Metrologist]

It works with the DataServer. Have you tried using the DataServer?

[TimSmith]

It works with the DataServer. Have you tried using the DataServer?

I was just asking about DPRNTing to a memory card! What does the DPRNT syntax look like to write to the memory card?