Operator's message language


Results 1 to 11 of 11

Thread: Operator's message language

  1. #1
    Member Hey_You's Avatar
    Join Date
    May 2020
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Operator's message language

    The CRT language is in English but the Operator's messages are all in German. Parameters 3102 & 9924 are all set to zero. Any idea?
    Controller: Fanuc 16M
    Tnx in advance

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    644
    Downloads
    0
    Uploads
    0

    Default Re: Operator's message language

    The operator messages are written in the PMC ladder. Most builders will allow you to change the messages to diffrent languges. You will have to check the manulas that came with the machines. If you don't have thoes post the ladder and we can see if a keep relay or Data number are required to change languge.



  3. #3
    Member Hey_You's Avatar
    Join Date
    May 2020
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Operator's message language

    Thanks drdos
    if u know the related keep relay or data number pls inform me, I can change it.



  4. #4
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    644
    Downloads
    0
    Uploads
    0

    Default Re: Operator's message language

    Quote Originally Posted by Hey_You View Post
    Thanks drdos
    if u know the related keep relay or data number pls inform me, I can change it.
    I don't know for your machine. Please post the ladder file and I can take a look and see if it has that option.



  5. #5
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    479
    Downloads
    0
    Uploads
    0

    Default Re: Operator's message language

    if you post the machine type and model no it may be easier to assist as Dr Dos has already said it is upto the manufacturers



  6. #6
    Member Hey_You's Avatar
    Join Date
    May 2020
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by mbservice View Post
    if you post the machine type and model no it may be easier to assist as Dr Dos has already said it is upto the manufacturers
    Controller is fanuc 16m as I've written previously.

    The machine is FAMUP MCX 600 with dual pallet

    I found sth in a pdf, but I didn't figure out what to do. I've highlighted it for you, please take a look at it.
    Tnx

    Attached Files Attached Files


  7. #7
    Member Hey_You's Avatar
    Join Date
    May 2020
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default Re: Operator's message language

    Here it is.
    The Ladder is attached.
    Thanks for your time.

    Attached Files Attached Files


  8. #8
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    644
    Downloads
    0
    Uploads
    0

    Default Re: Operator's message language

    Thanks for the ladder file. All messages are in German ONLY! The builder's didn't put in any English message which you can switch to. I did however used Google Translate to convert them to English. I did the best that I could. If you find a message that needs to be changed let me know and I can fix that for you. Your ladder also has no symbols or comments which make it harder to use. There was an error in the ladder file that said there was a "Paste Error" in level 2. I couldn't find one but I had it remove it anyway. So make sure that your machine runs OK after loading.

    Attached Files Attached Files


  9. #9
    Member Hey_You's Avatar
    Join Date
    May 2020
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by drdos View Post
    Thanks for the ladder file. All messages are in German ONLY! The builder's didn't put in any English message which you can switch to. I did however used Google Translate to convert them to English. I did the best that I could. If you find a message that needs to be changed let me know and I can fix that for you. Your ladder also has no symbols or comments which make it harder to use. There was an error in the ladder file that said there was a "Paste Error" in level 2. I couldn't find one but I had it remove it anyway. So make sure that your machine runs OK after loading.
    Oh thank you very much drdos, I really appreciate your effort. How could you find out there is no English message? I've attached a file in my previous comments, doesn't it help?



  10. #10
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    644
    Downloads
    0
    Uploads
    0

    Default Re: Operator's message language

    Quote Originally Posted by Hey_You View Post
    Oh thank you very much drdos, I really appreciate your effort. How could you find out there is no English message? I've attached a file in my previous comments, doesn't it help?
    If you go to the message page where all the alarm messages are it only had German. You can write many messages in different language and only display the ones in your language. Usually done via function block. Yours wasn't written like that so only German language available. Did the messages display ok?



  11. #11
    Member Hey_You's Avatar
    Join Date
    May 2020
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by drdos View Post
    If you go to the message page where all the alarm messages are it only had German. You can write many messages in different language and only display the ones in your language. Usually done via function block. Yours wasn't written like that so only German language available. Did the messages display ok?
    You're right, mine were only in German but only the (operator) messages, not alarms. The display has no problem.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Operator's message language

Operator's message language

Operator's message language