ER2 alarm on Fanuc controller O-T

[Hamid35]

Hi guys
Today when i turned on the machine , the ER2 led was red , no alarm text or error code in screen , can change turrut or spindle , but can go home or move axis ,by the way oil is full , plz help me

Similar Threads:

• ER2 alarm on Fanuc controller O-T
• Kryle VMC 535 with Fanuc 0MF Controller Alarm 408
• Need Help!- ATC Alarm on Fanuc Controller
• fanuc om controller alarm codes?
• Fanuc 18i controller 926 FSSB alarm

[mbservice]

please send or post pic of the alarm

[Hamid35]

please send or post pic of the alarm

Ok see

[zavateandu]

in this error ER2 on Victor machine there are so many posibilities to generate alarm so will be very difficult for us to trace it.
i can help you but you need to photo the ladder completly when the alarm is generated.
good luck

PS:i worked for Victor Machinery 15 years so i know what i say.

[mbservice]

Ok see

Change your batteries there is an alarm showing at bottom of screen

[Hamid35]

Change your batteries there is an alarm showing at bottom of screen

Tnx

[Hamid35]

in this error ER2 on Victor machine there are so many posibilities to generate alarm so will be very difficult for us to trace it.
i can help you but you need to photo the ladder completly when the alarm is generated.
good luck

PS:i worked for Victor Machinery 15 years so i know what i say.

Problem fixed , i changed battery it works !!!

[tmtopcu]

hello sir ? have this alarm code only er2 and ? changed battery but it dont turn off. it dont move spindle and turret