Fanuc OT alarm


Results 1 to 2 of 2

Thread: Fanuc OT alarm

  1. #1
    Member neurent's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Unhappy Fanuc OT alarm

    Hello everyone,
    I have a Biglia 1989 with GE Fanuc OT system and I have two mechanical problems that I haven't done before. First is Alarm 1011 temp. centralina that I can't find in books or internet. But my pression in autoblock has reduced and don't work hydraulic pump of 32 oil. I don't what to control with that.
    Second is no 2006 "torretta sbloccata" that is with turret is not in position and to automatic change of tools.
    If have any ideas anyone to help me because in my country we haven't electrical or electronic engineers that fix problems of CNC.
    Thank you in advance.

    Similar Threads:


  2. #2
    Member cncmakers001's Avatar
    Join Date
    Jul 2011
    Location
    China
    Posts
    152
    Downloads
    1
    Uploads
    3

    Default Re: Fanuc OT alarm

    Quote Originally Posted by neurent View Post
    Hello everyone,
    I have a Biglia 1989 with GE Fanuc OT system and I have two mechanical problems that I haven't done before. First is Alarm 1011 temp. centralina that I can't find in books or internet. But my pression in autoblock has reduced and don't work hydraulic pump of 32 oil. I don't what to control with that.
    Second is no 2006 "torretta sbloccata" that is with turret is not in position and to automatic change of tools.
    If have any ideas anyone to help me because in my country we haven't electrical or electronic engineers that fix problems of CNC.
    Thank you in advance.
    For the second alarm 2006"torretta sbloccata" that is with turret is not in position and to automatic change of tools.
    It could be the tool is not move to the position yet, but the tool change time is over.
    You can try to set tool change time longer(change by parameter of the CNC controller), so the tool will have enough time to go to the right position.

    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc OT alarm

Fanuc OT alarm

Fanuc OT alarm