Help needed to identify my Mill


Results 1 to 8 of 8

Thread: Help needed to identify my Mill

  1. #1

    Default Help needed to identify my Mill

    Hello, I have this 1987 mill in my garage and would like to get it operational, I can't find any makers name any where.
    I has a General Numeric 810m probably a GA 1 have it powered up but need the system toolbox .
    Thanks
    Larry

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Help needed to identify my Mill-image-jpeg   Help needed to identify my Mill-image-jpeg   Help needed to identify my Mill-image-png   Help needed to identify my Mill-image-jpg  



  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4495
    Downloads
    0
    Uploads
    0

    Default Re: Help needed to identify my Mill

    The base machine has the appearance of being made by Topwell, a manufacturer of high quality machine tools in Taiwan. There were many container loads of those machines imported in the 80's and then the CNC hardware was installed by the importer in the US. If you bought a container load, Topwell would put any name you wanted on it. The badge normally is above the spindle speed dial, but it looks like yours is missing. Most of the machines I have seen had Anilam controls on them, never seen one with a General before. That's a first for me. Most of those importers are long out of business, but you can still get some parts for the machines.

    As far as the controls, good luck. I wouldn't even mess with 30 year old controls, but I have a pretty low tolerance for antique controls, although I am still using the 30 year old DC servos and drives on my machine with modern controls. Modern control systems are cheap and readily available. I would look at Dynomotion, Centroid, Mesa, or CamSoft. If you should want to replace servos, then DMM servos and drives would be my first choice.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    723
    Downloads
    2
    Uploads
    0

    Default Re: Help needed to identify my Mill

    BP kneemill clone CNC.....good luck finding software. what is inside the cabinets? VFD ? Axis amps?



  4. #4

    Default Re: Help needed to identify my Mill

    The cabinet has all the power supplies and the simoreg transistorsteller



  5. #5

    Default Re: Help needed to identify my Mill

    Thanks Jim, I just looked at a picture of a Topwell mill and I think you are right.
    Still not sure what to do with the controls but I will,check into cost and availability in the near future.
    Thanks again
    Larry



  6. #6
    Member
    Join Date
    Apr 2009
    Location
    Canada
    Posts
    1199
    Downloads
    0
    Uploads
    0

    Default Re: Help needed to identify my Mill

    General Numeric was a joint marketing company between Siemens and Fanuc; the 810 is definitely a Siemens.



  7. #7

    Default Re: Help needed to identify my Mill

    Thank you, I have contacted Siemens and gave them the part numer of my control.
    They said they will contact me with a P/N and cost wor what I need.
    Thanks again



  8. #8
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    723
    Downloads
    2
    Uploads
    0

    Default Re: Help needed to identify my Mill

    Quote Originally Posted by Lardawg View Post
    Thank you, I have contacted Siemens and gave them the part numer of my control.
    They said they will contact me with a P/N and cost wor what I need.
    Thanks again
    ...would be nice if you can get up and running for a few hundred dollars
    good luck on the mission



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help needed to identify my Mill

Help needed to identify my Mill

Help needed to identify my Mill