Need Help! FS-31iA


Results 1 to 3 of 3

Thread: FS-31iA

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    India
    Posts
    310
    Downloads
    0
    Uploads
    0

    Default FS-31iA

    Dear Experts
    We have a HMC with high cycle time of close to 30 minutes hence operator of this machine is also engaged in other 3 machines
    We need to incorporate a M code in part program to trigger buzzer about 2 minutes before cycle gets over so that Operator can come over to this machine to remove machined components
    Can any one please advice on how to create M code and interlock to initiate buzzer
    Regards



  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    841
    Downloads
    0
    Uploads
    0

    Default Re: FS-31iA

    Kindly post the ladder. You will need to locate an available output to power the buzzer. From the ladder we can find an available M-Code. Some machine tool builders (but not all) have spare M-Codes with outputs just for this reason.



  3. #3
    Member
    Join Date
    Dec 2006
    Location
    India
    Posts
    310
    Downloads
    0
    Uploads
    0

    Default Re: FS-31iA

    Thank you



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FS-31iA

FS-31iA