Fanuc Program Transfer Tool, varying file extension


Results 1 to 3 of 3

Thread: Fanuc Program Transfer Tool, varying file extension

  1. #1
    Member
    Join Date
    Jun 2008
    Location
    finland
    Posts
    113
    Downloads
    0
    Uploads
    0

    Default Fanuc Program Transfer Tool, varying file extension

    When dragging a file from Machine view to PC view to upload a program, on machine A the file is transferred without extension and on machine B the uploaded file has .NC file extension.

    I have read Fanuc's Program Transfer Tool manual and could not find any option that affect the extension of uploaded file, so where does it come from? Machine parameters?

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2012
    Location
    USA
    Posts
    43
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc Program Transfer Tool, varying file extension

    Program XFER tool,
    In Windows:
    Start / PTTCONF.exe will start the "Setting Dialog Tool" where you can change the extension type per machine under Tab "DISPLAY"
    HTH



  3. #3
    Member
    Join Date
    Jun 2008
    Location
    finland
    Posts
    113
    Downloads
    0
    Uploads
    0

    Default Re: Fanuc Program Transfer Tool, varying file extension

    Hi,
    Unfortunately this has no effect on what extension is put in the filename after transfer is complete. There are 3 machines and all of them have .NC defined in pttconf.exe, yet only on one machine the NC extension is added.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fanuc Program Transfer Tool, varying file extension

Fanuc Program Transfer Tool, varying file extension

Fanuc Program Transfer Tool, varying file extension