fanuc 6m program units are in microns

[mrserra]

dear Ladies and Gentleman,
bought an old fanuc tape center model dv.
im an new to cnc programming and learning.
This time i cant find a solution for my problem.
Programming G00 X100;
moves to coordinates X=0.1
Programming g00 z10000
moves to x=10.0
i could upload pictures if necessary
also i must often repeat g90 for absolute
coordinates because almost automatically
without knowing why it enter incremental coordinates mode
any help appreciated.
does any one has a manual for this machine?

Similar Threads:

• New System, Different Units for Jog and GCode Program
• Program recomendations for fanuc drip feed/program input/output
• Can't run a program Fanuc O-M
• Fanuc Tool Life Management time units

[drdos]

Try Programming G00 X100; with the decimal point (G00 X100.0 then it will move to coordinates X=100.0