YAM lathe with 6t


Results 1 to 4 of 4

Thread: YAM lathe with 6t

  1. #1
    Member
    Join Date
    Mar 2003
    Location
    Saskatchewan, Canada
    Posts
    67
    Downloads
    6
    Uploads
    0

    Default YAM lathe with 6t

    Hi. I have small Yam CK2 lathe that I use only maybe a couple times a year for about 1 wk use. This year using the same part program that worked in previous years, the M00 program stop is not working correctly. When this line is executed , it is to illuminate the 'program stop release' push button and wait until the button is pushed. It is not illuminating this button and does not continue when the button is pressed. On the diagnostic screen I can seen addr 0037.0 change when this button is pressed so that seems to be working correctly. The light is actuated when addr 0001.4 is a 1 (true), but it stays a 0 (false). The thing is, that when the 'dry run' switch is activated, the light will illuminate. I can switch the 'dry run' off and light stays illuminated and when the 'program stop release' is pressed, the program will continue as it should. The program will also run as it should in the 'dry run' mode.
    Does anyone have a idea as to what I should be looking for?

    Similar Threads:
    D. Paulson


  2. #2
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    458
    Downloads
    0
    Uploads
    0

    Default Re: YAM lathe with 6t

    What happens if you change M00 to M30 does program stop and reset



  3. #3
    Member
    Join Date
    Mar 2003
    Location
    Saskatchewan, Canada
    Posts
    67
    Downloads
    6
    Uploads
    0

    Default Re: YAM lathe with 6t

    M30 stops and rewinds to beginning like it should.

    D. Paulson


  4. #4
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    458
    Downloads
    0
    Uploads
    0

    Default Re: YAM lathe with 6t

    Try stopping spindle , turning off coolant etc to see why it's not stopping



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

YAM lathe with 6t

YAM lathe with 6t

YAM lathe with 6t